Home Research Members Publications Seminars Courses Contact
The Morris Group
Publications
In situ studies of the transmission of strain across grain boundaries
Materials Science and Engineering: A, Volume 462, Issues 1-2, 25 July 2007, Pages 412-417
J.W Morris, Jr., M. Jin and A.M. Minor

In situ nanoindentation in the TEM
Materials Today, Volume 10, Issue 4, April 2007, Pages 59-60
Oden L. Warren, Zhiwei Shan, S.A. Syed Asif, Eric A. Stach, J.W. Morris, Jr. and Andrew M. Minor

Strain-induced coarsening in nano-grained films
Thin Solid Films, Volume 515, Issue 6, 12 February 2007, Pages 3202-3207
M. Jin, A.M. Minor and J.W. Morris Jr.

Chapter 78 In situ Nanoindentation in a Transmission Electron Microscope
Dislocations in Solids, Volume 13, 2007, Pages 453-497
Andrew M. Minor, Eric A. Stach and J.W. Morris Jr.

Martensite variants generated by the mechanical transformation of precipitated interlath austenite
Scripta Materialia, Volume 53, Issue 8, October 2005, Pages 933-936
Z. Guo and J.W. Morris, Jr.

Room temperature dislocation plasticity in silicon
Philosophical Magazine, Volume 85, Numbers 2-3, January 2005 , Pages 323-330
Minor, A.M.; Lilleodden, E.T.; Jin, M.; Stach, E.A.; Chrzan, D.C.; Morris, J.W.

Effects of solute Mg on grain boundary and dislocation dynamics during nanoindentation of Al–Mg thin films
Acta Materialia, Volume 52, Issue 20, 1 December 2004, Pages 5783-5790
W.A. Soer, J.Th.M. De Hosson, A.M. Minor, J.W. Morris, Jr. and E.A. Stach

On coherent transformations in steel
Acta Materialia, Volume 52, Issue 19, 8 November 2004, Pages 5511-5518
Z. Guo, C.S. Lee and J.W. Morris, Jr.

Direct observation of deformation-induced grain growth during the nanoindentation of ultrafine-grained Al at room temperature
Acta Materialia, Volume 52, Issue 18, 18 October 2004, Pages 5381-5387
M. Jin, A.M. Minor, E.A. Stach and J.W. Morris, Jr.

The influence of triaxial stress on the ideal tensile strength of iron
Scripta Materialia, Volume 49, Issue 10, November 2003, Pages 1007-1011
D. M. Clatterbuck, D. C. Chrzan and J. W. Morris

The ideal strength of iron in tension and shear
Acta Materialia, Volume 51, Issue 8, 7 May 2003, Pages 2271-2283
D. M. Clatterbuck, D. C. Chrzan and J. W. Morris

The Ideal Strength of Iron
Nano and Microstructural Design of Advanced Materials, 2003, Pages 173-190
D.M. Clatterbuck, D.C. Chrzan and J.W. Morris, Jr.

The non-linear elastic behavior and ideal shear strength of Al and Cu
Materials Science and Engineering A, Volume 317, Issues 1-2, 31 October 2001, Pages 44-48
C. R. Krenn, D. Roundy, J. W. Morris and Marvin L. Cohen

Deformation at the limit of elastic stability
Materials Science and Engineering A, Volumes 309-310, 15 July 2001, Pages 121-124
J. W. Morris, C. R. Krenn, D. Roundy and Marvin L. Cohen

Precipitation and hardening in Al–Si–Ge
Materials Science and Engineering A, Volume 301, Issue 2, 31 March 2001, Pages 231-236
D. Mitlin, U. Dahmen, V. Radmilovic and J. W. Morris

Scanning SQUID microscope differentiation of ferromagnetic steel phases
Acta Materialia, Volume 48, Issue 10, 14 June 2000, Pages 2655-2664
T. J. Shaw, J. W. Chan, S. -H. Kang, R. McDermott, J. W. Morris and J. Clarke

The compatibility of crack closure and Kmax dependent models of fatigue crack growth
International Journal of Fatigue, Volume 21, Supplement 1, September 1999, Pages 147-155
C. R. Krenn and J. W. Morris
all rights reserved by the Morris Group, copyright 2007